Customer Reviews
1 Item(s)
per page
- Take Your Time Review by HLJ
-
Quality Price Value
Next, grab the bottom bracket, and two steel bands. When positioning the bottom bracket, you want that hole in the center (where the eye bolt screws in) to be ON THE TOP. Set your brackets as tight as you can. Slide the pole in the hole securing it with the pin and ring. Before using the screw driver to secure the bands, pull down on that bracket and bands and bring it down as far as you can (with the pole already in it). Secure the bracket with the bands (opposite directions) with the screw driver. THEN, grab your eye bolt and screw that down (this will push that pull down a little further). This is to make sure the banner is taut and NOT loose. YOU MUST have the eye bolt holes in the right spots or your banners will have wrinkles and be very loose. It is VERY worth it if you take your time and do it the right way! After installing two, I flew through the next 12. It took me three hours to install 14. They look FABULOUS!! Very pleased with these two products (banner AND hardware). (Posted on 8/27/2017)
1 Item(s)
per page